Kärcher Submersible dirt water pump SP 22.000 Dirt Level Sensor
Couldn't load pickup availability
Reliable pumping of clean and dirty water with a pump capacity of up to 22,000 l/h. The submersible dirty water pump SP 22,000 Dirt Level Sensor with level sensor and integrated pre-filter.
The SP 22,000 Dirt Level Sensor dirt pump is equipped with an individually adjustable level sensor that starts as soon as it comes into contact with water. If the water level drops below the level sensor, the pump stops automatically after 15 seconds. The extremely powerful submersible pump is ideal for draining large garden ponds, flooded basements or construction shafts, for example, because it can reliably pump out dirty water (dirt particles up to 30 mm) at a speed of up to 22,000 l/h. The integrated, fold-down stainless steel pre-filter protects against blockages caused by even dirtier water. The submersible pump can also be set for continuous operation using a switch for automatic/manual mode. It can reliably pump away water at a residual water level of 35 millimeters – both in continuous operation and in automatic mode, when the level sensor is set to this. With the thread in The Quick Connect coupling allows 1”, 1 1/4” and 1 1/2” hoses to be easily connected. The stainless steel housing and the robust mechanical seal ensure that the pump has an extra long service life.
Features and benefits
Ceramic seal.
For extra long service life.
Level sensor
For stepless definition of start and stop points on the pumps.
Quick Connect
Connection thread for quick and easy connection of 1", 1 1/2" and 1 1/4" hoses.Suitable for dirty water
- Reliable pumping of water with dirt particles up to 30 mm.
Auto/manual operation
- For switching between automatic and manual mode.
Comfortable lifting handle
- Comfortable to hold.
Robust and integrated stainless steel pre-filter
- Protects the pump against excessive dirt and thus prevents the impeller from blocking.
Specifications
Technical data
| Motor power, max (W) | 750 |
| Pump capacity, max (l/h) | < 22000 |
| Temperature (°C) | Max. 35 |
| Delivery height (m) | 8 |
| Pressure (bar) | Max. 0.8 |
| Particle size (mm) | Max. 30 |
| Immersion depth (m) | Max. 7 |
| Delay time (s) | 15 |
| Min. residual water, manual (mm) | 35 |
| Remaining water height (mm) | 35 |
| Connection thread | G1 1/2 |
| Connection thread on the pressure side | G1/2 internal thread |
| Power cable (m) | 10 |
| Voltage (V) | 230 - 240 |
| Frequency ( Hz ) | 50 |
| Paint | Yellow |
| Weight without accessories (kg) | 6.7 |
| Weight incl. packaging (kg) | 7.7 |
| Dimensions (L × W × H) (mm) | 238 x 293 x 354 |
The following is included
- Hose socket: 1'', 1 1/4'', 1 1/2''
Standard equipment
- Comfortable lifting handle
- Quick Connect for quick and easy hose connection
- Change between manual or automatic operation: On/off on the pump
- Level sensor: continuous level adjustment
- Integrated stainless steel pre-filter
- In automatic operation (auto), the pump switches automatically with the water level
- In manual operation, the pump runs continuously until the minimum water level is reached.
- Ceramic seal.
- Stainless steel cover
Areas of use
- To pump water out of a garden pond
- For use in flooded areas
- For drainage of construction pits up to a maximum of 100 m³
