Kärcher Submersible pump SP 17.000 Flat Level Sensor
Couldn't load pickup availability
Reliable pumping of clean and dirty water with a pump capacity of up to 17,000 l/h. The powerful submersible pump SP 17 0000 Flat Level Sensor with suction of dirty water down to 1 mm, level sensor and automatic/manual switch. Including pre-filter.
The most powerful submersible clear water pump pumps up to 17,000 liters of clean to slightly polluted water per hour and is therefore ideal for swimming pools, drainage drums and water damage in buildings. The use of the stainless steel pre-filter included in the delivery is recommended in the case of heavier pollution and to protect the pump impeller. The robust stainless steel housing and mechanical seal make the pump particularly durable. The submersible pump for flat suction is equipped with a stepless level sensor, which automatically switches the pump on when it comes into contact with water. The SP 17,000 Flat Level Sensor also has foldable support legs, which means that the submersible pump is activated at a water level of 7 mm. The switch can be used to set the pump to continuous operation in manual mode. It reliably pumps away water at a residual water level of 1 millimeter – both in continuous operation and in automatic mode, when the level sensor is set to this. The connection thread in The Quick Connect coupling also allows for very easy connection of 1", 1 1/4" and 1 1/2" hoses.
Features and benefits
Ceramic seal.
For extra long service life.
Level sensor
For stepless definition of start and stop points on the pumps.
Quick Connect
Connection thread for quick and easy connection of 1", 1 1/2" and 1 1/4" hoses.Foldable legs
- Switch from normal operation to higher capacity down to 1 mm.
Automatic venting
- The pump starts working in manual mode at a water level of 7 cm.
Auto/manual operation
- To switch between automatic and manual mode.
Comfortable lifting handle
- Comfortable to hold.
Easy to attach rust-free pre-filter
- Protects the pump against excessive dirt and thus prevents the impeller from blocking.
Specifications
Technical data
| Motor power, max (W) | 550 |
| Pump capacity, max (l/h) | < 17000 |
| Temperature (°C) | Max. 35 |
| Delivery height (m) | 9 |
| Pressure (bar) | Max. 0.9 |
| Surface suction up to (mm) | 1 |
| Particle size (mm) | Max. 5 |
| Immersion depth (m) | Max. 7 |
| Delay time (s) | 15 |
| Min. residual water, manual (mm) | 1 |
| Remaining water height (mm) | 1 |
| Connection thread | G1 1/2 |
| Connection thread on the pressure side | G1/2 internal thread |
| Power cable (m) | 10 |
| Voltage (V) | 230 - 240 |
| Frequency ( Hz ) | 50 |
| Paint | Yellow |
| Dimensions (L × W × H) (mm) | 238 x 293 x 356 |
| Weight without accessories (kg) | 6 |
| Weight incl. packaging (kg) | 7.3 |
The following is included
- Removable stainless steel filter
- Hose socket: 1'', 1 1/4'', 1 1/2'' incl. check valve
Standard equipment
- Comfortable lifting handle
- Quick Connect for quick and easy hose connection
- Change between manual or automatic operation: On/off on the pump
- Change to flat suction
- Level sensor: continuous level adjustment
- Ceramic seal.
- In manual operation, the pump runs continuously until the minimum water level is reached.
Areas of use
- For water damage in the house or basement (e.g. a washing machine leak or basement flooding)
- To pump the pool clean.
- For installation in a drainage drum.
